Fitting curtain rods

Sorted in 5 steps!

Choosing curtain rods is one step, but after that they still need to be installed. That is easier than you think. With the following 5 steps, you'll have it sorted in no time.

Step-by-step plan

  • Step 1: gather your tools
  • Step 2: measure and mark
  • Step 3: attach brackets
  • Step 4: fit the curtain rod
  • Step 5: finishing

Step 1: Gather your tools

For an easy approach you need the right tools:

  • tape measure
  • Pencil
  • Spirit level
  • Drill with the right bits
  • Plugs and screws (depending on your wall type)
  • A screwdriver or Allen key
  • Ladder or step stool

Step 2: Measure and mark

First the position:

Every situation is different. See what suits you best around the window.
Determine the height:

For a luxurious look, mount the curtain rod approximately 15 cm above the window frame. In a high room, you can place the pole even higher to create the illusion of height.

Mark the fixing points:

3. Measure from the top of the window frame and mark the spots for the brackets. Make sure they are equidistant from the window and use a spirit level to prevent crooked lines.

Check the symmetry:

4. Place the brackets at the same distance from the sides of the window.

Step 3: Fit brackets

  • Drilling holes: Use the correct drill bit for your wall type (for example, a masonry bit for brick walls).
  • Fit wall plugs: For a plasterboard wall, use special wall plugs to attach the brackets securely.
  • Screw the brackets tight: Ensure they are secure, as they have to support the weight of the curtains and the rail.

Step 4: Fit the curtain rod

Put the curtains on the rail: Hang the curtains from rings, loops or hooks, depending on the type of curtain.
Secure the rail in the brackets: Some rails have a screw mechanism to hold them in place.
Rods

Step 5: Finishing

Check that the curtains can move smoothly. Finish with end caps for a stylish look.
Finials
Tips for a perfect result!

Extra help: Two pairs of hands make the work easier, especially with long curtain rods.
Account for walls: For plasterboard or hollow walls, sturdy wall plugs and long screws are a must.

No bending needed, but it does go around the corner: place 2 curtain rings on the wall bracket. The curtain will then go around the corner, thereby sealing the gap with the windowsill and/or wall.

With these steps, you'll have a professionally fitted curtain rod in no time. With the right approach, you'll complete your interior! Good luck!

Do you have any questions or would you like advice on how best to use our curtain rods in your space?

Please feel free to contact us, we are happy to help you think things through! You can reach us by email info@chamberline.nl or message to 0651656759.

Alternatively, take a further look at our website for more inspiration.

Do you have any questions or would you like advice on how best to use our curtain rods in your space?
Feel free to get in touch with us, we are happy to help you think things through! You can reach us by email at info@chamberline.nl or by sending a message to 0651656759.

Alternatively, take a further look at our website for more inspiration.